CONCRETE ADMIXTURES
Waterproofing concrete admixture, Cement concrete Accelerate, The formation Increase concrete strength
Non-Reemulsifiable Acrylic Latex Bonding Agent
+ Bonding Agent suitable for integrate concrete and cement.
Use to apply a concrete surface for adhesives or mixed with cement to integrate old and new concrete together. Increase adhesion strength, Tensile strength and compressive strength.
Suitable for concrete surface finishing work, Repairing concrete floors, Pouring over the concrete floor, Plastering with thin sand, And plastering or waterproofing work
Concrete Plasticiser
+ Concrete strength additive solution
Mix with concrete to increase the ability to pour the concrete. Thus allowing to reduce the water used and the higher power. Can be used to reduce water, to increase the ability to pour, or to reduce the amount of cement.
Accelerator/Cold weather protection
+ Concrete accelerator solution
Speed ​​up the formation. Increase the ability to pour. Helping the concrete to become denser and stronger. Increasing the strength of the concrete, both first and last stage, not less than 20%.
Which is important in tasks that require speed Can reduce the solidification time of concrete up to 50%
MOTAR PLASTICISER
+ Concrete accelerator solution
Speed up the formation. Increase the ability to pour. Helping the concrete to become denser and stronger. Increasing the strength of the concrete, both first and last stage, not less than 20%. The strength of the first phase will help reduce the time spent in the work, which is very important in tasks that require speed. Can reduce the solidification time of concrete up to 50%
Concrete Waterproofer
+ Waterproofing agent
Use concrete to reduce water absorption by increasing the ability to pour. Able to reduce the amount of water that is used in mixing. Therefore, it will provide better concrete density, more opacity and control of the amount of air in the concrete to be spread throughout the concrete. Can be used in general concrete work and reinforced concrete. Compatible with ordinary cement and sulfate-resistant cement.
Mortar WaterProofer
+ Waterproofing concrete admixture
+ High Strength, Workable, Waterproof Motors and Cement Coating for Interior and Exterior Application.
Mix with concrete to increase water-permeability. By increasing the ability to pour. Thus reducing the amount of water used to mix. Getting the more concrete texture. More opacity and control the amount of air in the concrete to spread throughout the concrete. Can be used in general concrete work and reinforced concrete. Compatible with ordinary cement and sulfate-resistant cement.
FORM-RELEASING AGENT & CURING COMPOUND
Mould Release Agent / Concrete Curing Compound
+ Chemical Releasing Agent For Formwork
+ One-step Concrete Curing and Hardening
The concrete must be properly cured in order to gain maximum strength and durability. The concrete that is released before the reaction process between cement and water is complete, will not be able to create good properties of concrete. Good concrete curing also helps reduce cracks caused by shrinkage of concrete as well.
LOT-CURE has sodium silicate compound, which when applied or sprayed on the concrete surface will cause crystallization, filling gaps and various porosity in the concrete surface area will keep moisture away from evaporating. LOT-CURE does not contain resin. The crystals of sodium silicate will gradually decompose within 4 weeks, while the color of LOT-CURE will fade away within a week when exposed to heat and sunlight.
​
LOT-CURE meets ASTM C-309 standards.
NON-SHRINK GROUT & SPECIAL CEMENT
High strength non-shrinking cement / stop leaking water immediately / Cement repair cracks / Cement waterproofing work
+ Non-Shrink, Non-Metallic High Strength Grout with Excellent Flow
Cement for non-alloys grout with excellent flow properties. Giving high strength both first and last stage. Does not shrink, but will expand while drying. Therefore, it is suitable for grouting on large machine base, holding anchors, bolts, grouting pillar base, welded joints of concrete. and repair cracks in concrete structures
+ Non-Shrink, Non-Metallic High Strength Grout with Excellent Flow
Cement for non-alloys grout with excellent flow properties. Giving high strength both first and last stage. Does not shrink, but will expand while drying. Therefore, it is suitable for grouting on large machine base, holding anchors, bolts, grouting pillar base, welded joints of concrete. and repair cracks in concrete structures
+ Non-Shrink Grout For General Purpose
+ High strength cement Non-metal powder.
Cement for grout without metal compound. Provide strength both first and last stage. Do not shrink, but will expand slightly while drying. Therefore, suitable for the base post, welded concrete joints, repair the floor, fill the hole in the concrete cavity. and repair cracks in concrete structures.
+ Non-Shrink Metallic High Strength Grout
​
Cement for grouting mixing metal. Giving high strength both first and last stage. Suitable for heavy-base machinery. Grate holds bolts, grout joints and concrete repairs.
The metal powder that is mixed in the lot expansion will expand to resist cement shrinkage. Resulting in stabilizing the concrete size.
​
+ Cement for stopping leak immediately.
+ Quick Set, Non-Shrink, High Strength Cement for Plugging Leaks
LOT-PLUG is hydraulic cement. Which can harden in just a few minutes Can leak water with high pressure Suitable for sealing concrete, sand cement, ceilings between walls and floors in the basement. Leak in the water storage tank. easy to use, durable and possess high power.
+ Expansive Cement
+ Cement for crack repair
Special mixed cement with fast drying. Giving high strength and expansion while forming. Making it suitable for use in grouting and general repair work. Especially for repairing cracks in plastered walls Because it can be expanded to fill the area of ​​repairing with fine texture and beautify the skin.
EPOXY & RESIN ANCHOR
Epoxy Glue / Resin Plug
+ Epoxy adhesive
Resistant to heat, moisture, chemicals, and corrosion. Very strong, well absorb to high tension. Possess good insulation property. The time spent in hardening is shorter than concrete. Can develop power faster and higher than concrete. Suitable for use with construction in many cases Because it provides strong adhesion between concrete, ceramic, glass, wood and metal. Making it ideal for repairing broken structures, repair pile head, Attach the bolt to the base of the machine, and the work of punching steel holes to attach on the structure.
+ Viscous epoxy adhesive.
Easy to use, fast curing, high viscosity. Suitable for use in fastening. Cut the deformed steel with concrete. Vertical concrete repair or ceiling could be easily attached. Can develop faster. Withstanding the impact and shear at outstanding level. In addition, it is suitable for connecting concrete that requires high adhesion strength between structures such as concrete, ceramic, glass, wood, metal and fiber board.
+ Encapsulated Resin Anchor
+ Resin plugs for use in high power mounting applications
LOT-LOCK is a concrete embedded plug. For fastening applications that require high power. Easy to use, convenient, fast, and do not create throttle like metal plugs.
LOT-LOCK resin is firmly bonded to the material that will embed the bolts. Allowing to receive high vibration and also prevent water or moisture to not make the bolts buried with rust.
WATERSTOP & WATERPROOF
PVC sheet and waterproof rubber sheet / water-based rubber swab
+ PVC sheet and waterproof rubber sheet
Used for bind in concrete joints to prevent water leakage through concrete joints. Suitable for use in homogeneous concrete pouring such as joints between the floor, concrete walls and beams or could be poured into the concrete floor or wall for a period of time. Stop pouring concrete until the concrete was solidified. Next, pouring new concrete to connect
Waterstop rubber swab Used for preventing water permeability in the concrete structure joints. Used for preventing seepage in new joints or use as the barrier between the joints from old and new concrete work. In all parts of the structure Such as foundation work, large beams, wall joints, floors, poles and roof structures, etc. It also can be used for floor joints, tunnels, basement floors And concrete road structure work.
+ Powder Waterproofer
+ Cement for waterproofing
Cement compounds for waterproofing applications. Suitable for applying or plastering on concrete and brick surfaces. To create a strong and durable waterproofing layer. Suitable for waterproofing, basement, elevator, swimming pool, water tank and building parts that are below the surface level for waterproofing.
FLOOR HARDENER
Toughened surface material / Strong surface cleaner
+ Non-metallic Industrial Floor Hardener
Tuffax G 1 is a material for plastering concrete. To add strength to the surface Makes the surface resistant to friction from having heavy objects moving
through Tufex G 1 surfaces are denser than ordinary concrete floors. Various fats or oils Therefore easily absorbed into the surface, making it last longer.
Tuffax G 1 is a strong, non-metallic coating material. Therefore can be used with concrete floors that are wet all the time. Very well, Ideal for industrial floor, hospital, shopping centre and car repair shop.